Prices Subject to Change Without Notice
2023 Price List
Here is a list of some of our services, however this list isn't a complete list, if you don't see it on the list, please feel free to email us for a quote. If you have a special project and would like a quote from us, please feel free to email us.
GENERAL | |
HOURLY RATE | 75.00 |
MINIMUM SHOP CHARGE | 25.00 |
TRANSFER FIREARM | 30.00 |
APPRAISAL PER GUN | 50.00 |
TEST FIRE FOR CHECKING FUNCTION (DOESN'T INCLUDE AMMO) | 35.00 |
SIGHT - IN (DOESN'T INCLUDE AMMO) | 40.00 |
ANNUAL SERVICES | |
K-80 ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 425.00 |
K-32 ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 545.00 |
KS-5 ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 265.00 |
KX-5/KX-6 ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 265.00 |
BT-99 ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 150.00 |
BT 100 ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 150.00 |
BROWNING CITORI ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 210.00 |
WINCHESTER 101 ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 275.00 |
BERETTA 680 SERIES ANNUAL SERVICE - INCLUDES REPLACEMENTS OF ALL SPRINGS, C/O, | |
ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 210.00 |
BLASER F3 30K ANNUAL SERVICE - INCLUDES REPLACEMENT OF SPRINGS, C/O, ADJUST TOLERANCES TO FACTORY SPECIFICATIONS. | 325.00 |
CLEAN AND OIL (INCLUDES COMPLETE DISASSEMBLY AND INSPECTION | |
OF PARTS) (MIN CHARGE) | 100.00 |
CLEAN AND OIL (FLUSH OUT ACTION AND CLEAN BBL) (MIN CHARGE) | 65.00 |
BARREL WORK | |
INSTALL BEAD (R & R) | 20.00 |
INSTALL BEAD (DRILL AND TAP) | 30.00 |
OPEN CHOKE | 75.00 |
CHOKE TUBE INSTALLATION | 125.00 |
CHOKE TUBE INSTALLATION WITH 3 TUBES - TRU-CHOKE STYLE | 225.00 |
CUT AND CROWN BARREL | 65.00 |
ELONGATE CHAMBER FORCING CONE | 65.00 |
PORTING (PER BARREL) (IN HOUSE) | 85.00 |
CHANGE POINT OF IMPACT | 80.00 |
BEND BARREL (NO GUARANTEE IT WILL STAY) | 50.00 |
INSTALL DEFLECTOR PIN | 60.00 |
CROSSFIRE BLADE (INCLUDES INSTALLATION) | 80.00 |
WELD-UP LOCKING BLOCK AND FIT. (INCLUDES COMPLETE CLEAN AND OIL OF GUN.) | 225.00 |
INSTALL NEW LOCKING BLOCK (PARTS NOT INCLUDED) | 150.00 |
TIGHTEN BARREL TO ACTION | 125.00 |
BARREL FITTING(MIN CHARGE) | 125.00 |
RE-SOLDER FRONT LUG (DOESN'T INCLUDE REBLUING) | 110.00 |
RE-SOLDER RIBS (DOESN'T INCLUDE REBLUING) | 400.00 |
REMOVE DENT FROM SHOTGUN BARREL (INCLUDES REMOVING DENT AND POLISHING) | |
MIN CHARGE PER BARREL | 50.00 |
FIT EXTRACTOR (MIN CHARGE) | 110.00 |
DELRON RIB (DOESN'T INCLUDE SHIPPING) | 250.00 |
WELD THE EARS ON THE BARREL TO TIGHTEN BARRELS TO ACTION | 200.00 |
WELD UP BARREL LUG AND FIT TO RECEIVER | 125.00 |
RESOLDER BARRELS INTO MONO BLOCK, TEST FIRE | 465.00 |
TIME OUT EJECTORS (PER EJECTOR) | 40.00 |
WELD UP HINGE PIN AREA AND MACHINE TO FACTORY SPECS. TEST FIRE (MIN CHARGE) | 175.00 |
INSTALL VENT RIB AND REBLUE - SIMMONS (SHIPPING EXTRA) | 500.00 |
INSTALL BARREL LINER (BARREL LINER IS EXTRA) | 100.00 |
STOCK WORK | |
INSTALL RECOIL PAD | 60.00 |
SHORTEN STOCK TO CUSTOMER SPECS AND FIT ORIGINAL PAD | 40.00 |
INSTALL JONES ADJUSTABLE PLATE | 90.00 |
INSTALL MORGAN PAD | 55.00 |
INSTALL COUNTER COIL | 150.00 |
INSTALL RECOIL REDUCER | 50.00 |
INSTALL GRACO UNITS | 175.00 |
INSTALL GRACO UNITS & NEW RECOIL PAD | 230.00 |
INSTALL SPEEDBUMP BUMP BUSTER INCLUDES PAD INSTALLATION | 150.00 |
INSTALL RAD #2 RECOIL REDUCER | 150.00 |
INSTALL PAT'S GUN REPAIR ADJUSTABLE BUTTPLATE | 90.00 |
ADJUSTABLE COMBS | |
ADJUSTABLE COMB (HARD TOP) | 300.00 |
ADJUSTABLE COMB (SOFT TOP) | 400.00 |
CONVERT HARD COMB TO SOFT COMB | 135.00 |
RECOVER SOFT TOP | 45.00 |
MAKE ANOTHER COMB (SOFT TOP) | 225.00 |
LOWER COMB - (REFINISHING NOT INCLUDED) | 50.00 |
STOCK WORK – REFINISHING | |
REFINISHING - FOREARM | 150.00 |
REFINISHING - BUTTSTOCK | 250.00 |
RE-CUT CHECKERING PER PANEL | 75.00 |
CUT NEW CHECKERING PER PANEL | 100.00 |
INSTALL SPACER (DOESN'T INCLUDE SPACER) | 35.00 |
INSTALL GUN NUTS | 35.00 |
PITCH CHANGE - (PAD REFIT INCLUDED) | 40.00 |
INLET STOCK OVER FOR CAST (INCLUDES GLASS BEDDING) | 125.00 Min. |
INLET BARRELED ACTION | 165.00 Min. |
GLASS BED BUTT STOCK | 50.00 Min. |
FREE FLOAT BARREL | 50.00 Min. |
FIT AND SHAPE SEMI INLET BUTTSTOCK (INCLUDES GLASS BEDDING) | 350.00 |
GLASS BED STOCK WITH PILLARS, FREE FLOAT BARREL | 225.00 |
GLASS BED AND FREE FLOAT | 140.00 |
TRIGGER WORK | |
RELEASE TRIGGERS (PAT'S GUN REPAIR PARTS UNLESS STATED OTHERWISE) | |
(PRICE IS FOR CONVERSION ONLY, TRIGGER ASSEMBLY WHERE APPLICABLE IS AN ADDITIONAL CHARGE) | |
KRIEGHOFF RELEASES | |
KS-5/ KX-5 RELEASE TRIGGER (FACTORY PARTS) | 475.00 |
K-80 RELEASE TRIGGER | |
K-80 RELEASE TRIGGER (SINGLE) | 450.00 |
K-80 RELEASE TRIGGER (DOUBLE) | 900.00 |
K-32 RELEASE TRIGGER | |
K-32 RELEASE TRIGGER (SINGLE) | 450.00 |
K-32 RELEASE TRIGGER (DOUBLE) | 900.00 |
BROWNING RELEASE TRIGGERS | |
BROWNING BT - 99 RELEASE TRIGGER | 375.00 |
BROWNING CITORI RELEASE TRIGGERS | |
BROWNING CITORI RELEASE TRIGGER (SINGLE) | 450.00 |
BROWNING CITORI RELEASE TRIGGER (DOUBLE) | 900.00 |
BROWNING LIGHTNING RELEASE TRIGGER | |
BROWNING LIGHTNING RELEASE TRIGGER (SINGLE) | 450.00 |
BROWNING LIGHTNING RELEASE TRIGGER (DOUBLE) | 900.00 |
BROWNING BT-100 RELEASE TRIGGER | 450.00 |
REMINGTON RELEASE TRIGGERS | |
REMINGTON 11-87 RELEASE TRIGGER | 275.00 |
REMINGTON 1100 RELEASE TRIGGER | 275.00 |
REMINGTON 870 RELEASE TRIGGER | 275.00 |
REMINGTON 3200 RELEASE TRIGGER | |
REMINGTON 3200 RELEASE TRIGGER (SINGLE) | 650.00 |
REMINGTON 3200 RELEASE TRIGGER (DOUBLE) | 1300.00 |
REMINGTON 90T RELEASE TRIGGER | 450.00 |
BERETTA RELEASE TRIGGERS | |
BERETTA AUTOS RELEASE TRIGGER | 275.00 |
BERETTA 680 SERIES RELEASE TRIGGERS | |
BERETTA 680 SERIES RELEASE TRIGGER (SINGLE) | 455.00 |
BERETTA 680 SERIES RELEASE TRIGGER (DOUBLE) | 950.00 |
PERAZZI RELEASE TRIGGERS | |
PERAZZI TMX/TM1 RELEASE TRIGGER | 450.00 |
PERAZZI O/U RELEASE TRIGGERS | |
PERAZZI O/U RELEASE TRIGGER (SINGLE) | 450.00 |
PERAZZI O/U RELEASE TRIGGER (DOUBLE) | 900.00 |
SKB RELEASE TRIGGERS | |
SKB RELEASE TRIGGER (SINGLE) | 450.00 |
SKB RELEASE TRIGGER (DOUBLE) | 900.00 |
WINCHESTER RELEASE TRIGGERS | |
WINCHESTER 101 RELEASE TRIGGER | |
WINCHESTER 101 RELEASE TRIGGER (SINGLE) | 450.00 |
WINCHESTER 101 RELEASE TRIGGER (DOUBLE) | 900.00 |
BENELLI AUTO RELEASE | 275.00 |
BLASER F3 RELEASE TRIGGER (SIMMONS RELEASE) (SHIPPING EXTRA) | |
BLASER F3 SINGLE RELEASE | 825.00 |
BLASER F3 DOUBLE RELEASE | 1,025.00 |
CONVERT FROM RELEASE TO PULL | |
CONVERT FROM RELEASE TO PULL WITH SEAR ADJUSTMENT. | 50.00 |
CONVERT FROM RELEASE TO PULL WITHOUT SEAR ADJUSTMENT | 35.00 |
CONVERT TO MECHANICAL TRIGGERS (BERETTA O/U, BROWNING O/U, PERAZZI O/U) | 65.00 |
ADJUST PULL TRIGGER | |
ADJUST TRIGGER PULL (SINGLE, INCLUDES ADJUSTING PULL WEIGHT, CREEP, AND OVERTRAVEL.) | 75.00 |
ADJUST TRIGGER PULL (DOUBLE, INCLUDES ADJUSTING PULL WEIGHT, | |
CREEP, AND OVERTRAVEL.) | 150.00 |
ADJUST RELEASE TRIGGER | |
ADJUST RELEASE TRIGGER (SINGLE RELEASE) | 50.00 Min. |
ADJUST RELEASE TRIGGER (DOUBLE RELEASE) | 100.00 Min. |
ACTION WORK | |
REM 3200 REMOVE AND REPLACE EJECTOR EAR. | 300.00 |
REFACE RECEIVER | 475.00 |
WELD UP FIRING PIN HOLE AND REMACHINE | 200.00 |
WINCHESTER MODEL 12, REPLACE HEADSPACE RING | 150.00 |
REBUILD FIRING PIN HOLES ON TM1 / TMX | 175.00 |
REBUILD FIRING PIN | 50.00 |
RIFLE WORK | |
DRILL & TAP, INSTALL FRONT SIGHT & BORE SIGHT | 35.00 |
DRILL & TAP, INSTALL REAR SIGHT, BORESIGHT | 35.00 |
MOUNT SCOPE BASES AND SCOPE, BORESIGHT SCOPE, NO DRILL &TAP | 40.00 |
DRILL AND TAP FOR SCOPE MOUNT BASES (PER HOLE) | 25.00 |
CUT AND CROWN RIFLE BARREL TO CUSTOMER SPECS. | 65.00 |
INSTALL MUZZLE BREAK | 125.00 |
INSTALL SLING SWIVEL STUDS | 40.00 |
CHAMBER, THREAD, CROWN BARREL | 175.00 |
RECHAMBER TO CUSTOMERS SPECS. | 110.00 |
FIT AND HEADSPACE SHORT CHAMBERED BARREL | 75.00 |
CHAMBER REAMER, HEADSPACE GAUGES RENTAL | 75.00 |
RELINER 22 BARREL | 90.00 |
CHAMBER CAST, CHECK HEADSPACE | 150.00 |
COMPLETE CLEAN AND OIL (INCLUDES DISASSEMBLY OF GUN AND INSPECTION OF PARTS) | 50.00 |
INSTALL TACTICAL BOLT KNOB | 75.00 |
INSTALL SAKO EXTRACTOR ON A REM 700 (DOESN'T INCLUDE EXTRACTOR PARTS) | 100.00 |
FLUTE BARREL (6) | 150.00 |
REAMER AND HEADSPACE GAUGE FEE | 65.00 |
WELD ON NEW BOLT HANDLE | 125.00 |
THREAD BARREL FOR SUPPRESSOR | 125.00 |
TRIGGER JOB FOR RIFLE | 75.00 |
PISTOL WORK | |
ADJUST TRIGGER TO CUSTOMER SPECS, TEST FIRE (MIN CHARGE) | 50.00 |
CLEAN AND OIL PISTOL (INCLUDES DISASSEMBLY OF PISTOL AND INSPECTION OF PARTS) ( Min) | 100.00 |
OTHER | |
ELECTROLESS NICKLE PLATE (BRIGHT) | 300.00 |
ELECTROLESS NICKEL SATIN | 300.00 |
BLUING - COMPLETE FIREARM - (MIN CHARGE) | 250.00 |
DEPLATE | 65.00 |
GOLD PLATE TRIGGER | 125.00 |
GOLD PLATE | 250.00 |
NITRATE FINISH | 290.00 |
FOREVER BLUE | 175.00 |
JEWELING PARTS - (MIN CHARGE) | 40.00 |
DURA - COAT | 250.00 |
COLOUR CASE HARDENING | 150.00 |
RUST BLUE (MIN CHARGE) | 200.00 |
BLUING BARRELS (MIN CHARGE) | 160.00 |